The Edifier S3000 Pro 2.0 powered bookshelf speakers are a high - end addition to the bestselling S - Series. With built - in EQ and a premium build, they offer an outstanding audio experience. The convenient wireless connection between the left and right speakers sets them apart from most powered stereo speakers. They support lossless and high - def Bluetooth V5.0 with Qualcomm aptX HD decoding and are certified HiRes audio. On - board rotary controls on the rear of the speaker let you adjust volume, bass, and treble. There are balanced, RCA, USB, optical, and coaxial wired inputs, along with 4 switchable EQ preset modes (Monitor, Dynamic, Classic, and Vocal). As active monitors, they don't need an amplifier. The included wireless remote allows easy switching between inputs and can control Bluetooth - connected devices. All necessary cables are also provided. Output goes up to 256w RMS, with a signal - to - noise ratio of ≥85dB (A) and a frequency response from 38Hz to 40kHz. The bass unit has a 6.5' aluminum alloy diaphragm, and the tweeter uses a 107mm Planar diaphragm. They measure 14' x 9.1' x 11.5' (356 x 231 x 292 mm) and weigh 50 lbs (22.7 kg). Comes with a full - function remote control, USB A - to - B cable, RCA to RCA cable, 3.5mm to RCA cable (Y - cable), fiber optic cable, 2 power cables, and an owner's manual.
Using your Edifier S3000 Pro 2.0 speakers is easy. First, connect the speakers to a power source using the provided power cables. Then, choose your input method. You can use wired connections like RCA, USB, optical, or coaxial, or go wireless with Bluetooth. If you use Bluetooth, pair your device with the speakers. The wireless remote control makes it simple to switch between different inputs and adjust settings. Use the on - board rotary controls on the rear of the speaker to fine - tune the volume, bass, and treble. You can also select from 4 different EQ preset modes according to your preference. When it comes to maintenance, keep the speakers in a dry and clean place. Wipe them gently with a soft, dry cloth if they get dirty. Avoid exposing them to extreme temperatures or humidity. If you're not using the speakers for a long time, unplug them from the power source. And always refer to the owner's manual if you have any specific questions or issues.
